F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
6. Detach the glow plug wiring harness retainers.
7. CAUTION: Do not disconnect the glow plug electrical connector before dislodging the seal from the valve cover or the wiring harness
may be damaged.
NOTE: Use a tool such as a body bone or trim fork to dislodge the seal. Do not use a screwdriver.
Using an appropriate tool, dislodge the glow plug wiring harness seals from the valve cover.
8. Disconnect the glow plug electrical connectors by pulling on the glow plug wiring harness tee above the seal.
Installation
Both sides
1. Connect the glow plug electrical connectors and press the seals on the valve cover.
2. Attach the glow plug wiring harness retainer.
LH side
3. Connect the 3 wiring harness in-line electrical connectors at the LH frame rail and attach the electrical connectors to the bracket.
4. Install the LH fender splash shield.
RH side
5. Install the RH fender splash shield.
6. Install the air cleaner.
