F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Glow Plug Control Module: Service and Repair
GLOW PLUG MODULE
Removal and Installation
1. Remove the 3 pushnuts and the heat shield.
-
Discard the pushnuts.
2. Disconnect the glow plug module electrical connectors.
3. Remove the 2 nuts and the glow plug module.
-
To install, tighten to 13 Nm (115 lb-in).
4. To install, reverse the removal procedure.
-
Use new heat shield pushnuts and install them using a small socket.
