F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Switch: Service and Repair
Mode Indication Switch
Removal and Installation
NOTE: Only vehicles with a mechanical shift transfer case are equipped with a mode indicator switch (MIS).
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the wiring harness connector.
3. Remove the MIS switch.
^
To install, tighten to 31 Nm (23 ft. lbs.).
4. To install, reverse the removal procedure.
