F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Exploded View
Removal and Installation
1. Remove the RH splash shield.
2. Remove the RH battery.
3. Remove the air cleaner.
4. Disconnect the windshield washer solvent hose and the position retainers.
5. Disconnect the wiring harness, vacuum hose, battery positive cable and battery negative cable position retainers from the battery tray.
6. Disconnect the A/C condenser inlet tube from the battery tray.
7. Remove the 2 bolts and the air cleaner support bracket.
-
To install, tighten to 15 Nm (11 lb-ft).
8. Remove the 3 bolts and position the battery tray aside for access to the windshield washer solvent pump electrical connector.
-
To install, tighten to 15 Nm (11 lb-ft).
9. Disconnect the windshield washer solvent pump electrical connector and remove the battery tray.
10. Remove the 4 pushpin retainers and the air cleaner intake pipe.
11. To install, reverse the removal procedure.
