F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
3. CAUTION: Putting the large restraints control module (RCM) electrical wiring connector into the RCM on an angle can cause bad
electrical connections and damage components.
NOTE: The restraints control module (RCM) has been removed for clarity.
Position the large RCM electrical connector into the RCM.
-
CAUTION: Do not push the connector to where the lever pivots and seats itself. Light pressure is needed to get the connector into
position on the restraints control module (RCM) before using the lever to fully seat the connector. Failure to follow this instruction
may result in component damage and/or system failure.
With the large RCM electrical connector uniformly aligned to the RCM, lightly push in until a subtle audible click is heard and slight
resistance is felt.
4. Connect the large RCM electrical connector.
-
Using the connector position assurance lever, pivot it toward the RCM, drawing the connector into the RCM.
-
Make sure the thumb tab is engaged to the retainer on the RCM and locked in place.
