F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Removal and Installation
WARNING:
-
Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly
flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
-
When handling fuel, always observe fuel handling precautions and be prepared in the event of fuel spillage. Spilled fuel may be ignited by
hot vehicle components or other ignition sources. Failure to follow these instructions may result in serious personal injury.
NOTE: This procedure is for diesel applications only.
1. NOTE: The fuel tank must be drained completely. Upon removal of the fuel level sensor, the tank must be inspected for contamination.
Remove the fuel tank.
2. CAUTION: Clean the fuel tank of any dirt or foreign material before servicing the fuel level sensor. In extreme dirt or dusty conditions it
may be necessary to wash the fuel tank using a water hose. Before removing the fuel level sensor, make sure that there is no residual dirt
or foreign material around the fuel level sensor flange. If dirt or foreign material enter the fuel tank, damage to the fuel level sensor or
other fuel system components may occur.
Clean the area around the fuel level sensor lock ring.
