F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Air Flow Meter/Sensor: Service and Repair
MASS AIR FLOW (MAF) SENSOR
Removal and Installation
1. CAUTION: Make sure the ignition switch is in the OFF position prior to working on the electronic engine controls or the vehicle may be
damaged.
Turn the ignition switch to the OFF position.
2. Disconnect the mass air flow (MAF) sensor electrical connector.
3. Remove the bolts and the MAF sensor.
-
To install, tighten to 3 Nm (27 lb-in).
4. To install, reverse the removal procedure.
-
Make sure the wiring harness retainer is attached to the air cleaner when connecting the electrical connector.
