F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
EGR Temperature Sensor: Service and Repair
Exhaust Gas Recirculation Temperature (EGRT) Sensor - Outlet
EXHAUST GAS RECIRCULATION TEMPERATURE (EGRT) SENSOR - OUTLET
Removal and Installation
1. CAUTION: Make sure the ignition switch is in the OFF position prior to working on the electronic engine controls or the vehicle may be
damaged.
Turn the ignition switch to the OFF position.
2. Disconnect the outlet exhaust gas recirculation temperature (EGRT) sensor electrical connector.
3. Remove the outlet EGRT sensor.
-
To install, tighten to 38 Nm (28 lb-ft).
4. To install, reverse the removal procedure.
