F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Hydraulic Booster-to-Steering Gear Pressure Line (Part 2)
Removal and Installation
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or failure of the power
steering components may result.
NOTE: The jumper line can be serviced separately. It is not necessary to remove the jumper line from the hydraulic booster when servicing the
pressure line.
All vehicles
1. Using a suitable suction device, drain the power steering fluid reservoir.
2. Remove the fender splash shield.