F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Power Steering Line/Hose: Service and Repair
Power Steering Pump to Steering Gear Pressure Line
Power Steering Pump to Steering Gear Pressure Line
Material
Removal and Installation
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of foreign material or failure of the power
steering components may result.
1. Using a suitable suction device, drain the power steering fluid reservoir.
2. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
3. Remove the pressure line bracket/pump bolt.
^
To install, tighten to 25 Nm (18 ft. lbs.).