F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
15. Rotate the holding fixture 180 degrees.
16. CAUTION: Do not allow the screwdriver to make contact with the valve housing bore, or damage to the sealing area may occur, causing
a fluid leak.
Using a screwdriver, remove and discard the input shaft dust seal.
17. Remove and discard the input shaft seal snap ring.
18. Rotate the holding fixture 180 degrees.
19. Using the special tool, remove the input shaft bearing and input shaft seal.
^
Discard the input shaft seal.
