F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
NOTE
FAILURE TO UPDATE THE CENTER BEARING BRACKET (FIGURE 2 AND 3), IF REQUIRED, MAY RESULT IN DRIVELINE
SHUDDER.
10.
If necessary, install new center bearing and/or shim (refer to Figure 2 and 3 for correct application) assembly as required.
11.
For checking driveline angles, refer to WSM, Section 205-00.
12.
Adjust headlamp aim by referring to the WSM Section 417-01.
NOTE