F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Wheel Fastener: Service and Repair
Front
Wheel Studs - Single Rear Wheel (SRW)
Wheel Studs - Single Rear Wheel (SRW)
Removal
1. Remove the wheel hub and brake disc assembly.
2. Using a suitable press, remove and discard the wheel stud.
Installation
1. Position the new wheel stud in the wheel hub and brake disc assembly, aligning the serrations in the disc brake rotor flange made by the original
wheel stud.
2. Using a suitable press, install the new wheel stud.