F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
3. NOTE: Wiggle the axle shaft while sliding the hublock on the splines to ease installation.
Slowly rotate the wheel hub while installing the hublock into the hub.
^
Push the hublock in firmly by hand to seat the O-ring seal completely.
4. Rotate the hublock dial counterclockwise to the AUTO position.
^
Be sure that the axle shaft turns freely.
5. Tighten the new hublock screws to 6 Nm (53 inch lbs.).
Dual rear wheel vehicles
6. Install the front wheel hub extender and nuts.
^
Tighten to 176 Nm (130 ft. lbs.).
7. Install the front wheels and tires.
