F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
16. Disconnect the exhaust pipes.
17. Lift the right side of the engine approximately 38.1 mm (1.5 inch).
Early build vehicles
18. Remove the remote mount transmission fluid filter secondary latches.
19. CAUTION: A backup wrench must be used on the remote mounted transmission fluid filter housing while disconnecting and connecting
the transmission fluid cooler tubes or damage to the filter housing will occur.
NOTE: The quick connect fittings may need to be removed from the remote mount transmission fluid filter housing in order to disconnect the
middle fluid cooler tubes. Do not reuse the quick connect fittings.
Using the special tool, disconnect the middle fluid cooler tubes from the remote mount transmission fluid filter housing.
20. Disconnect the front RH ABS electrical connector.
