F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
10. Connect the exhaust pipes.
^
Tighten to 40 Nm (30 ft. lbs.).
11. NOTE: The transmission insulator studs may have been removed with the nuts, install if necessary.
Tighten the transmission insulator nuts.
^
Tighten the studs to 75 Nm (55 ft. lbs.).
^
Tighten the nuts to 115 Nm (85 ft. lbs.).
12. Install the 3 LH engine mount nuts.
^
Tighten to 172 Nm (127 ft. lbs.).
13. Install the 4 RH engine mount nuts.
^
Tighten to 115 Nm (85 ft. lbs.).