F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
2. Push the bulkhead connector through the solenoid body and twist the bulkhead connector, locking it into place.
3. Install the shift solenoid (SSPC-C) back into place and install the (E) retaining clip.
4. Connect the electrical connectors to the pressure control solenoid (PC-A) and the shift solenoid (SSPC-C).
5. Install the wire harness to solenoid body and tighten the bolts.
2. Install the solenoid body electrical connector O-ring seal, lubricate it with clean transmission fluid.
3. Install the transmission main control valve body.
