F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Connect the selector lever cable onto the steering column.
1. Connect the selector lever cable retainer.
2. Connect the selector lever cable onto the steering column bracket.
3. Connect the selector lever cable onto the selector lever arm ball stud.
^
Listen for the audible click.
^
Pull back on the selector lever cable to make sure that it is correctly installed.
8. Install the steering column lower shroud.
1. Install the screws and the lower shroud.
9. Install the instrument panel lower finish panel.
10. Adjust the selector lever cable.