F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
6. Once the fitting is removed from the transmission fluid cooler, verify that there is a gasket between the transmission fluid cooler and the inside of
the radiator tank.
^
If there is no gasket, install a new radiator.
^
If there is a gasket, continue with this procedure.
7. Inspect the transmission fluid cooler fitting threads for damage.
^
If the threads are damaged, install a new radiator.
^
If the threads show no sign of damage, continue with this procedure.
8. CAUTION: Thread sealant or tape should never be used on the threads of the transmission fluid cooler fittings. The use of such materials
will create a leak path.
Install a new O-ring on the transmission fluid cooler fitting.
9. Making sure that the gasket between the transmission fluid cooler and the inside of the radiator tank is still in place, install the upper transmission
fluid cooler fitting.
^
Tighten to 60 Nm (44 ft. lbs.).
