F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Working inside the vehicle, unlock the push rod retaining clips and separate the clutch master cylinder push rod from the clutch pedal.
6. Remove and discard the clutch master cylinder push rod bushing.
7. Remove the switch cover and the clutch pedal position (CPP) switch from the clutch master cylinder push rod.
8. Separate the power distribution box from the bracket to gain access to the clutch master cylinder.
9. Unlock and remove the clutch master cylinder from the clutch pedal and support bracket.
^
Compress and twist the clutch master cylinder clockwise 45 degrees to unlock it from the clutch pedal and support bracket.
10. WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical
advice. In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product
Material Safety Data Sheet (MSDS) if available. Failure to follow these instructions may result in serious personal injury.
CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled on a painted or plastic surface, wash the
affected area immediately with cold water.
Remove the clutch hydraulic system from the vehicle.
11. WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical
