F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Fluid - Differential: Capacity Specifications
Differential Oil Capacity
FRONT AXLE LUBRICANT CAPACITY
DANA Super 60 ........................................................................................................................................................................................ 6.38 pints (3.02L)
REAR AXLE LUBRICANT CAPACITY
10.50 Inch Axle ........................................................................................................................................................................................... 6.9 pints (3.26L)
DANA 80 ...................................................................................................................................................................................................... 8.9 pints (4.2L)
DANA S110/S130 .......................................................................................................................................................................................... 14 pints (6.6L)
Motorcraft SAE 75W-140 Synthetic Rear Axle Lubricant (XY-75W140-QL) is used in both the 10.50 Inch Axle and in the DANA S110/S130 axles.
In the DANA S110/S130, the lubricant capacity will vary depending on the housing mounting angle. The capacity given is for an angle of 4 degrees. A
lubricant level close enough to the bottom of the fill hole to be seen or touched is not sufficient. The lubricant must be level with the fill hole.
