F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Axle Shaft: Service and Repair
Full Floating Axle - Dana
Axle Shaft
Removal and Installation
1. Set the parking brake.
2. Remove the 8 axle shaft bolts.
-
To install, tighten to 133 Nm (98 lb-ft).
3. Remove the axle shaft.
4. Inspect the following components:
-
The O-ring for damage. Install a new O-ring as necessary.
-
The axle shaft for cracked material around the holes or oversized holes. Install new components as necessary.
5. NOTE: Lubricate the O-ring with premium long-life grease.
To install, reverse the removal procedure.
