ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 8255 > < Transmission Cooler, M/T|Locations|Page 8252
Page 1
background image

Transmission Cooler: Initial Inspection and Diagnostic Overview

Inspection and Verification - Manual Transmission

CAUTION: When internal wear/damage occurs in the transmission, component material can travel into the fluid cooler tubes and the
in-tank transmission fluid cooler. Remove these contaminants from the cooling system before placing the transmission back into use.

1. Visually inspect for obvious signs of mechanical damage, incorrect component installation, and system leaks. Repair as necessary.

^

Install a new or remanufactured radiator when fluid is found leaking from the in-tank transmission fluid cooler.

2. If the fault is not visually evident, GO to Symptom Chart - Manual Transmission Cooling. See: Symptom Related Diagnostic Procedures/Symptom

Chart - Manual Transmission Cooling

Initial Inspection and Diagnostic Overview|Page 8255 > < Transmission Cooler, M/T|Locations|Page 8252