F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
3. NOTE: While lowering the solenoid body, the manual valve may fall out of the solenoid body.
Remove the solenoid body.
1. Disconnect the transmission range (TR) position sensor electrical connector.
2. Remove the solenoid body bolts.
3. Remove the solenoid body.
4. Remove the solenoid body gasket.
Installation
Early Build Vehicles With Externally Mounted Remote Filter
CAUTION: Early build vehicles, those equipped with an externally mounted remote filter, are also equipped with a different design sump
filter and bottom pan. Always pair the sump filter with the correct bottom pan design, to avoid cavitation, filter cracking and transmission
damage.