F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
6. Remove the RH and LH rear assist handles.
All vehicles
7. Remove the RH and LH rear garment hooks.
8. If equipped, remove the roof opening panel trim.
Crew Cab and SuperCab vehicles
9. Remove the 3 rear headliner pushpin retainers.
All vehicles
10. Lower the rear of the headliner.
Vehicles with power sliding window
11. Position the sliding glass to the halfway open position.
12. Remove the bumpers from the sliding window bracket.
13. CAUTION: Slowly release the spring tension after the cable swag is removed from the sliding glass channel bracket. If the spring tension
is suddenly released, the cables can unwind from the drum. If the cables unwind from the drum, a new regulator and motor assembly will
have to be installed.
NOTE: RH shown, LH similar.
Remove the cable swags from the sliding window glass channel bracket.
-
Carefully squeeze the regulator and motor assembly spring to create slack in the cable.
-
Remove the cable swag from the sliding window glass channel bracket.
14. Pull the LH and RH cable ends out of the sliding window trough.