F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
SuperCab
Removal and Installation
With power windows
1. Remove the window control switch.
All vehicles
2. Remove the door trim panel and watershield.
3. NOTE: Do not remove the window glass from the door.
Temporarily install the window switch or the window crank and lower the window to access the glass clamp nuts and remove the nuts.
-
To install, tighten to 10 Nm (89 lb-in).
4. Tape the window glass in the full up position.
5. Disconnect the window motor electrical connector (power windows only).
