F 350 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
3. Remove the rear safety belt retractor.
4. Remove the rear seat back.
5. Pull the rear door opening weatherstrips away from the rear corner trim panel.
6. Remove the scuff plate.
7. Remove the rear corner trim panel.
8. Route the safety belt through the rear corner trim panel openings.
INSTALLATION
1. Follow the removal procedure in reverse order.
Rear Door Window Garnish Moulding - SuperCab
REMOVAL
1. Remove the screws to the rear window latch.
2. Position the latch out of the way.
3. Pry the moulding to remove.
NOTE: The weatherstrip must be removed. It is fastened on top by a pushpin.
INSTALLATION
1. Follow the removal procedure in reverse order.
Windshield Side Garnish Moulding
REMOVAL
