F 350 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
6. Measure the disc brake rotor thickness.
-
Replace the disc brake rotor if not above the minimum thickness specification.
7. Inspect the disc brake caliper for leaks.
-
If leaks are found, disassembly is required. Refer to Brake Caliper.
8. If necessary, remove the V-springs.
9. Remove the pads and rail clips.
1
Remove the pads.
2
Remove the front disc brake caliper anchor plate stainless steel rail clips.
Installation
1. CAUTION: Do not allow grease, oil, brake fluid or other contaminants to contact the pad lining material. Do not install contaminated pads.