F 350 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Vehicles Built Before 11/30/00
Removal
CAUTION: Be careful not to damage the finger-like valve cartridges while removing and installing the anti-lock brake control module.
1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
Disconnect the battery ground cable.
2. On F250-550 vehicles, remove the air cleaner.
3. On F250-550 vehicles, remove the EVAP canister.
4. WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally,
drink water and induce vomiting. Get medical attention immediately.
CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it
with water.
NOTE: Plug each port to prevent brake fluid from spilling.
NOTE: F250-550 shown, motorhome similar.
Disconnect the hydraulic brake lines.
1
Disconnect the inlet hydraulic brake lines.
2
Disconnect the outlet hydraulic brake lines.
5. NOTE: F250-550 shown, motorhome similar.
