F 350 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Remove the bearing retainer.
7. Remove the bearing and the gear.
^
Thoroughly clean all drill shavings from the steering column and inspect it for damage.
8. NOTE: Use a new ignition switch lock cylinder.
To install, reverse the removal procedure.
^
Verify ignition switch lock cylinder operation.
9. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions and notes in the reactivation
procedure.
Reactivate the Supplemental Restraint System (SRS).