F 350 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
6. Install the tie-rod end onto the wheel knuckle.
1. Position the tie-rod end into the wheel knuckle.
2. Install and tighten the castellated nut.
3. Install the cotter pin.
7. Install the new main seal onto the axle shaft.
1. Position the main seal onto the axle shaft.
2. Using the special tools and a hammer, seat the main seal onto the axle shaft.
8. Position the axle shaft into the axle housing.
9. Using the special tools and a hammer, install the main seal into the wheel knuckle.
10. Install the wheel hub and bearing.
11. Install the front brake disc.
12. Install the wheel and tire assembly.