F 450 2WD Super Duty V10-6.8L VIN S (1999)
Electronic Brake Control Module: Service and Repair
Rear Antilock Brake System (RABS)
Removal
1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
On diesel equipped vehicles, remove the battery tray.
2. On gas equipped vehicles, disconnect the battery ground cable.
3. On gas equipped vehicles, remove the engine air cleaner.
4. On gas equipped vehicles, remove the EVAP canister.
5. Remove rubber dust cover.
-
Remove pushpin.
6. Disconnect the three anti-lock brake control module electrical connectors.
7. Remove the anti-lock brake control module.
1
Remove the screw.
2
Lift and remove the anti-lock brake control module.
Installation
