F 450 2WD Super Duty V10-6.8L VIN S (1999)
5. Inspect the disc brake caliper for leaks.
-
If leaks are found, disassembly is required.
Installation
1. Install the disc brake caliper.
1
Install the disc brake caliper.
2
Install the disc brake caliper pin bolts.
2. Install the front brake hose.
-
Use new copper washers. Connect the front brake hose.
-
Install the front brake hose bolt.
3. Bleed the brake system.
4. Install the wheel and tire assembly.
5. Fill the brake master cylinder reservoir with clean High Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent DOT 3 fluid meeting
Ford specification ESA-M6C25-A, PM-1 (Canada CPM-1). Install the brake master cylinder filler cap.
6. Inspect the brake system operation.