F 450 2WD Super Duty V10-6.8L VIN S (1999)
Camshaft: Service and Repair
Removal
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly
flammable mixtures are always present and can be ignited, resulting in possible personal injury.
WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running.
1. Disconnect the battery ground cable.
2. Remove the intake manifold.
3. Remove the timing chain/belts.
4. Remove the six bolts retaining the balance shaft bearing caps and remove the bearing caps.
5. Remove the balance shaft.
6. Use the Valve Spring Compressor to compress the valve springs and remove the camshaft roller followers.
