F 450 2WD Super Duty V10-6.8L VIN S (1999)
16. Disconnect the EGR valve vacuum line.
17. NOTE: The EGR valve is shown removed for clarity.
Disconnect the EVR solenoid electrical and vacuum harness.
18. Remove the throttle body adapter:
^
Remove the four bolts.
^
Remove the throttle body adapter.
^
Remove the throttle body adapter gasket.
19. Remove the two screws at the top of the fan shroud and position the fan shroud toward the engine.
20. Remove the generator.
21. Install the Modular Engine Support Bracket on the engine using the generator mounting holes.
22. Raise and support the vehicle.
