F 450 2WD Super Duty V10-6.8L VIN S (1999)
minutes, whichever is longer. Failure to follow this procedure can cause future oil leakage.
NOTE: Make sure that the engine front cover gasket is in place on the engine front cover before installation.
Apply the silicone along the cylinder head to cylinder block surface and the oil pan to cylinder block surface.
^
Use Silicone Gasket and Sealant F6AZ-19562-AA or equivalent meeting Ford specification WSE-M4G323-A6.
2. Install the engine front cover with engine front cover gasket on the front cover to cylinder block dowel and loosely install the bolts.
Engine Front Cover Bolt Sequence
