F 450 2WD Super Duty V10-6.8L VIN S (1999)
9. Pull the seal from the A/C compressor.
INSTALLATION
1. Clean the A/C compressor nose area.
CAUTION: Do not allow dirt or other foreign materials to enter the A/C compressor.
2. Place the shaft seal on the Shaft Seal Protector.
-
Lubricate the shaft seal and the Shaft Seal Protector with Motorcraft YN-12c refrigerant oil or equivalent meeting Ford specification
WSH-M1C231-B.
3. Position the shaft seal and the Shaft Seal Protector over the A/C compressor shaft.
4. Push the shaft seal onto the A/C compressor shaft with the Shaft Seal Replacer until seated.