F 450 2WD Super Duty V10-6.8L VIN S (1999)
2. Remove the safety belt buckle.
1
Use the Safety Belt Bolt Bit to remove the safety belt buckle bolt.
2
Disconnect the safety belt warning indicator switch connector.
3
Remove the safety belt buckle.
NOTE:
-
Driver side shown, passenger side similar.
-
Passenger side safety belt buckle is not equipped with a safety belt warning indicator switch.
INSTALLATION
1. Follow the removal procedure in reverse order.
NOTE: Make sure to tighten bolts to specification.
Front - 40/20/40 Seat
REMOVAL
1. Remove the driver passenger seat, as required.
2. Remove the safety belt buckle.
1
Remove the safety belt buckle nut.
2
Remove the safety belt buckle.
NOTE: Driver side shown, passenger side similar.
INSTALLATION