F 450 2WD Super Duty V10-6.8L VIN S (1999)
1. Follow the removal procedure in reverse order.
-
Check the restraint system for proper operation.
NOTE:
-
Make sure the safety belt webbing is not twisted prior to installation.
-
Make sure to tighten nuts and bolts to specification.
Front Safety Belt and Tongue
Safety Belt Bolt Bit
Special Tool(s)
REMOVAL
NOTE: Safety belt buckles, height adjusters, center adjust tongues and belts and retractors can be replaced separately. However, if a safety belt
assembly was in use during a collision, the belt and retractor must be replaced as well as the center adjust tongue and belt and buckle assembly or the
center adjust tongue and the cable and buckle assembly. When replacing safety belts and buckles, height adjusters, safety cables and buckles, center
