F 450 2WD Super Duty V10-6.8L VIN S (1999)
Extension Housing: Service and Repair
NOTE: MERCON Automatic Transmission Fluid is being replaced by MERCON V as a service fluid.
Special Tools
Removal
1. Raise the vehicle on a hoist.
2. Remove the driveshaft.
3. Remove the transmission insulator to crossmember support nuts.
4. Remove the High Lift Transmission Jack with the E40D Transmission Jack Adapter to the transmission.
5. CAUTION: Be sure not to raise the back of the transmission too high, if it makes contact with the underbody damage to the TSS and
OSS sensors will occur.
Remove the rear transmission mount.
1
Raise the transmission up off the rear crossmember support.
2
Remove the bolts.