F 450 2WD Super Duty V10-6.8L VIN S (1999)
Torque Converter: Service and Repair
Service and Replacement
1. The must be replaced if one or more of the following statements are true:
^
A torque converter malfunction has been determined based on the complete diagnostic procedures.
^
Converter stud(s), impeller hub or bushing is damaged.
^
Discoloration of the torque converter (due to overheating).
^
The is found to be out of specification when performing one of the following torque converter checks:
-
One-Way Clutch Check
-
End Play Check
-
Stator to Turbine Interference Check
-
Stator to Impeller Interference Check
-
Torque Converter Leak Check
^
Evidence of transmission assembly or fluid contamination due to the following transmission or converter failure modes:
-
major metallic failure
-
multiple clutches or clutch plate failures
-
sufficient component wear which results in metallic contamination.