F 450 2WD Super Duty V10-6.8L VIN S (1999)
Transmission Cooler: Service and Repair
Fluid Cooler Tubes - 6-Speed Manual Transmission
Removal
NOTE: To remove the production fluid cooler tubes it will be necessary to cut the tubes.
1. Raise and support the vehicle.
2. Remove the front skid plate.
1
Remove the bolts.
2
Remove the front skid plate.
3. Remove the lower air deflector.
1
Remove the bolts.
2
Remove the lower air dam.
4. Use a tube cutter to cut the fluid cooler tubes at the fluid cooler tube bracket.
5. Remove the fluid cooler tubes.
