F 450 2WD Super Duty V10-6.8L VIN V (2005)
5.
Measure the distance from inboard sur[ace of the door molding flange to outboard surface of the window glass (Figure 2). Distance from flange to
glass should be between 5/8-3/4" (16-19 mm) for F-Super Duty and Excursion, and 3/16-7/16" (5-11 mm) for Expedition and Navigator.
6.
Lower glass completely.
7.
Adjust the door molding flange to meet the 5/8-3/4" (16-19 mm) dimension. Do not adjust flange more than 3/4" (19 mm) away from the glass.
8.
Install a new lower window molding weather strip assembly.
9.
Reinstall mirror.
10.
If the side door glass has been scratched, replace the glass. Refer to Workshop Manual, Section 501-11.