F 450 2WD Super Duty V10-6.8L VIN V (2005)
Hood Latch Release: Service and Repair
HOOD LATCH RELEASE HANDLE
Removal and Installation
1. Disconnect the battery.
2. Remove the powertrain control module (PCM).
3. Remove the nuts.
4. Lower the hood latch release/park brake bracket and position aside.
5. Disconnect the hood latch release cable.
6. Release the retaining clip from the hood latch release handle to the park brake bracket.
7. Release the return spring and remove the hood release handle.
8. To install, reverse the removal procedure.