F 450 2WD Super Duty V10-6.8L VIN V (2005)
7. CAUTION: If the components are to be reinstalled, they must be installed in the same positions. Mark the components for installation into the
original locations.
Remove only the 3 roller followers shown in the illustration from the RH cylinder head.
8. CAUTION: Do not allow the valve keepers to fall off the valve or the valve may drop into the cylinder.
NOTE: The camshaft roller followers must be installed in their original locations. Record camshaft roller follower locations.
NOTE: It may be necessary to push the valve down while compressing the spring.
Using the special tool, remove only the 3 designated roller followers from the previous step.
LH camshaft
