F 450 2WD Super Duty V10-6.8L VIN V (2005)
15. CAUTION: The crankshaft cannot be moved past the 6 o'clock position once set.
Rotate the crankshaft clockwise, as viewed from the front, positioning the crankshaft damper spoke at the 6 o'clock position and the timing mark
indentation at the 7 o'clock position.
RH camshaft
16. CAUTION: Engine is not freewheeling. Camshaft procedure must be followed exactly or damage to valves and pistons will result.
CAUTION: The Timing Chain Wedge tool must be installed square to the timing chain and the engine block.
NOTE: Front cover removed for clarity.
Install the special tool in the RH timing chain as shown.
17. CAUTION: Do not remove the timing chain wedge tool at any time during assembly. If the special tool is removed or out of placement, the
engine front cover must be removed and the engine must be retimed.
