F 450 2WD Super Duty V10-6.8L VIN V (2005)
22. CAUTION: Do not remove the timing chain wedge tool at any time during assembly. If the special tool is removed or out of placement, the
engine front cover must be removed and the engine must be retimed.
CAUTION: The timing chain must be installed in its original position onto the camshaft sprocket using the scribed marks, or damage to valves
and pistons will result.
Scribe a location mark on the timing chain and the camshaft phaser sprocket assembly.
23. CAUTION: Remove the front thrust camshaft bearing cap straight upward from the bearing towers, or the bearing cap may be damaged from
side-loading.
NOTE: The camshaft bearing caps must be installed in their original locations. Record camshaft bearing cap locations.
Remove the bolts in the sequence shown and remove the front camshaft bearing cap and then the remaining bearing caps.