F 450 2WD Super Duty V10-6.8L VIN V (2005)
6. Remove the special tools.
LH camshaft
7. CAUTION: Do not remove the timing chain wedge tool at any time during assembly. If the special tool is removed or out of placement, the
engine front cover must be removed and the engine must be retimed.
CAUTION: Do not allow the roller followers to move out of position when installing the camshaft.
Install the camshaft into the camshaft sprocket assembly and onto the head. Install a new camshaft sprocket bolt finger tight.
8. CAUTION: Do not remove the timing chain wedge tool at any time during assembly. If the special tool is removed or out of placement, the
engine front cover must be removed and the engine must be retimed.
CAUTION: The timing chain must be installed in its original position onto the camshaft sprocket using the scribed marks, or damage to valves
and pistons will result.