F 450 2WD Super Duty V10-6.8L VIN V (2005)
Lifter / Lash Adjuster: Service and Repair
Hydraulic Lash Adjusters
Hydraulic Lash Adjusters
Material
Removal and Installation
1. Remove the camshafts.
2. Remove the remaining roller followers from the cylinder head being serviced.
3. CAUTION: If the components are to be reinstalled, they must be installed in the same positions. Mark the components for installation into their
original locations.
Remove the hydraulic lash adjusters that are being serviced.
4. Inspect the hydraulic lash adjusters.
5. NOTE: Lubricate each of the hydraulic lash adjusters with clean engine oil prior to installation.
To install, reverse the removal procedure.