F 450 2WD Super Duty V10-6.8L VIN V (2005)
Rocker Arm Assembly: Service and Repair
Camshaft Roller Follower
Camshaft Roller Follower
Special Tool(s)
Material
Removal
1. Depending on the roller follower being serviced, remove the LH or RH valve cover.
2. Rotate the crankshaft until the piston for the valve being serviced is at the top of its stroke with the intake valve and the exhaust valves closed.
3. CAUTION: If the components are to be reinstalled, they must be installed in the same positions. Mark the components for installation into their
original locations.
Using the special tool, compress the valve spring and remove the camshaft roller follower.
4. Repeat the previous 2 steps for each roller follower being serviced.
5. Inspect the roller follower.
Installation
1. CAUTION: If the components are to be reinstalled, they must be installed into their original locations.
Using the special tool, compress the valve spring and install the camshaft roller follower.